PURETE

1.film pressure process: in the plane of the workpiece coated with a layer of UV paint, through the process of film pressure, the effect attached to the top of the film to the surface of the workpiece, so as to get the effect on the film; (top coat process)

2.the type of substrate: a good bottom treatment of melamine board, calcium silicon board, magnesium glass board and so on;

3.Type of paint: UV paint;

Alternative to manual pouring action, first of all, the coating machine to apply a layer of paint up, and then over the film press is completed.

1.Connected production, high efficiency;

2, Occupying less space, the curing finished product can be completed on the line;

3.1 person to operate the machine, 4 people to assist the material feeding; a line of 5 people can be;

4.UV paint can be recycled without waste, cost saving;

Apply to do the topcoat on the surface of the board for the inverted film action, you can do skin, highlights, matte, etc., what effect on the film, do out of the paint is what effect, a thousand films a thousand faces;

This production line, M3, transfers the pattern on the top of the film to the top of the substrate by means of transfer printing, transforming a calcium silicate board into a stone effect such as rock/marble.